TRANG CHỦ » ÁNH SÁNG CHUYÊN DỤNG » Ánh sáng biểu diễn » FLASH Lighting

Bookmark and Share

LED PAR 64 7x10W RGBW Alu Cast -IP65- Mk2

LED PAR floodlight designed for work in high humidity conditions, resistant to dust and rain. The enclosure has been classified as IP65 (different version uses a power connector in IP65 or IP44 class) which allows it to be used on outdoor events or as architectural lighting without fear of damage caused by weather conditions. Passive cooling system (no fan) also makes it a perfect solution in places where it is required to use completely silent lighting. The device has all the advantages of a standard 7x10W Flash Professional reflector with Mk2 Software

 

The newest series of products designed and made in Poland is a guarantee of quality and reliability. A number of modern features used in Flash Professional series, combined with robust construction, unique design and versatility provides ease of use and the highest quality of light effects in almost all conditions.

NEW! Extremely smooth change of brightness

16-bit brightness control resolution

Brightness control using two DMX channels allows to achieve an outstanding resolution - 65536 levels of brightness! Thanks to this the device is ideally suited for professional theater installations, stage performances and broadcast TV. The ability to control the brightness in the full range allows to achieve excellent results of smooth changes and enables the precise setting of the desired color from the basic colors.

 

Brightness control curves

The ability to choose different brightness control curves allows to achieve the effect of a very smooth transition between different levels of brightness with a standard 8-bit control (single DIMMER fader). By choosing curves such as "Log" or "S-Curve" user can achieve more natural, smooth dimming, which is more visible at low DMX values. Additionally, this feature opens up new possibilities in color mixing at low magnitudes.

 

Dim delay – bulb simulation

Delayed LEDs reaction to the DIMMER fader changes causes even greater smoothing of brightness changes - even with 8-bit controll (single DIMMER fader)! By enabling this feature and selecting one of the specially designed characteristic curves (eg. "S-Curve"), you can obtain a perfect dimming effect with no jump between levels!

 

NEW! The same colors in the entire Flash Professional series

The color palette available in a seperated DMX channel has been calibrated in a way that using various fixtures from Flash Professional series allows to get the same color - regardless of the kind and a power of diode. Thanks to this option you will light the entire space evenly, using the same light's color. The factory calibration of the white color's temperature in various fixtures allows for fast and stable white balance adjustment in television or film application.

 

 

NEW! Compatibility with professional broadcast TV equipment - PWM 3000Hz

The refresh rate equal to 3000Hz gives an excellent compatibility with a huge palette of professional and amateur cameras and television systems currently used worldwide. Using this fixture in the TV studio or to illuminate the film set you don’t’ need to worry about the blinking picture effect.

NEW! Color LCD 1,8” display

New, clear device menu - a convenient device function control is now available on the bright, color LCD display with a resolution of 160 x 128px. On the display you can easily change the mode, DMX channel, the speed of the built-in macros, enable advanced options and even read the user manual built into the device! Clearly visible DMX channel or macro number allows to inspect the operation of the device from a distance without having to approach him.

NEW! DMX channel modes – layouts for everyone

A lot of different DMX modes to choose from - ease of use for both those using the basic functions of the fixture as well as for advanced users. "Classic" modes is a well-known D-S-R-G-B-W channel mode. For users who require maximum flexibility we have prepared RGB and RGBW modes, and their 16-bit control equivalents.

Modern, authored electronics

The devices were equipped with DMX signal regeneration and electronic protection against overheating features, which allows for seamless installation without the need for additional electronics. The ability to select one of two modes for fan allows you to use the fixture eg. in conditions where the key criterion is a quiet work. If your priority is the full power at higher ambient temperatures – “Disco” mode will provide adequate cooling in tough conditions.

The unique, patented design

Outstanding design is one of the most characteristic features of Flash Professional Series. Together with high quality and robust design it makes the new product ideal choice for owners of small discos, clubs and large event organizers. Dedicated bracket with an ergonomic handle and multiple mounting holes provides a great convenience. The devices are characterized by high quality finish and reliability.

 

-------- TECHNICAL DATA --------  
Power supply voltage 100 - 245V
Voltage frequency 50/60Hz
Fuse F5AL
Diode type 4in1
Diode power 10W
Display Color LCD
Number of diodes 7
-------- UTILITY DATA --------  
Color RGBW
Color rendering index (CRI) 87
Beam angle (min) 25°
Beam angle (max) 25°
Dimming Linear: 0 - 100%
Flash frequency (min) 1Hz
Flash frequency (max) 20Hz
DMX standard DMX 512
Control interface 4 buttons
-------- INTERFACES --------  
AC IN dedicated IP65 power plug
AC OUT dedicated IP65 power plug
DMX IN dedicated IP65 DMX plug
DMX OUT dedicated IP65 DMX plug
----- PHYSICAL CHARACTERISTICS -----  
IP Rating IP65
Housing made Aluminum
Cooling Passive
Height [cm] 29 - (witch packaging 32 cm)
Width [cm] 29 - (with packaging 32 cm)
Depth [cm] 17 - (with packaging 23 cm)
Weight [kg] 4,4
Download file
'
Các tin cùng chủ đề